CUSTOM ROM: EVO X2 for Galaxy Y
FEATURES:
Rooted, Deodexed, zipaligned,has init.d support etc..
Based on DDLE1 firmware
A2SD
TW launcher
MIUI music player
This is a minimalist rom. there is around 99 mb free in the system partition.
Scrolling cache is disabled for smoother scrolling.
Lidroid 15 toggles.
6 lockscreens
swipe to remove notification
The kernel by savie has 4 usable frequencies.
832MHz,624MHz,468MHz,and 312MHz.
18 governors, 5 I/O schedulers are added.
Droid wall
EXT4
cifs
swap
Dualboot
bacem tweak
Undervolt
Default undervolt value is 100mV
Excellent battery life.
Small footprint.
Bootanimation,boot sounds,and shutdown sounds are removed.
HOW TO INSTALL:
1.Download the Rom zip file and 'blk_screen_fix.zip'.
2.put them on your sd card.
3.Switch of your phone and reboot into cwm recovery.This is important because if you are using stock recovery it'll get stuck in the splash screen.
4.Install the rom zip file through cwm.
5.Wipe data and cache.
6.Flash the 'blk_screen_fix.zip'
6.Reboot the system and you are good to go.
Based on DDLE1 firmware
A2SD
TW launcher
MIUI music player
This is a minimalist rom. there is around 99 mb free in the system partition.
Scrolling cache is disabled for smoother scrolling.
Lidroid 15 toggles.
6 lockscreens
swipe to remove notification
The kernel by savie has 4 usable frequencies.
832MHz,624MHz,468MHz,and 312MHz.
18 governors, 5 I/O schedulers are added.
Droid wall
EXT4
cifs
swap
Dualboot
bacem tweak
Undervolt
Default undervolt value is 100mV
Excellent battery life.
Small footprint.
Bootanimation,boot sounds,and shutdown sounds are removed.
HOW TO INSTALL:
1.Download the Rom zip file and 'blk_screen_fix.zip'.
2.put them on your sd card.
3.Switch of your phone and reboot into cwm recovery.This is important because if you are using stock recovery it'll get stuck in the splash screen.
4.Install the rom zip file through cwm.
5.Wipe data and cache.
6.Flash the 'blk_screen_fix.zip'
6.Reboot the system and you are good to go.
GENERAL FAQ AND TROUBLE SHOOTING
1. How to set undervolt value and how to know current voltage values ?
To change the value manually,go to terminal and type the following command
1. How to set undervolt value and how to know current voltage values ?
To change the value manually,go to terminal and type the following command
echo -20mV > /proc/sys/bacem/volt/cpu.
Change the value '-120' to your preferred value.
For more info GO HERE.
Update:To know the current voltage the easier way. Flash savie's voltage-information tool from this
POST and type the following commands in terminal.
Update:To know the current voltage the easier way. Flash savie's voltage-information tool from this
POST and type the following commands in terminal.
suNavigate to sys/class/regulator/regulator.5/microvolts to know your current voltage value.
volt
The stock value at 832Mhz is 1300000.
Since the rom
is undervolted by -100mV it should be 1200000 @832 Mhz.
2.Anyone having problem with sim tool kit not installing can flash this zip
2.Anyone having problem with sim tool kit not installing can flash this zip
Is this compatible with Galaxy Y with baseband version DXKK2?
ReplyDelete