Disclaimer: SGY Love will not be responsible nor liable for any damage that might happen to your device during this process though the possibility of any damage is negligible. Try this at your own risk. This process has been tested and verified working on Samsung Galaxy Y.
Link2SD is an android application by Bulent Akpinar that lets you move apps and games to the 2nd partition of your SD card. Why do we have to use Link2SD when Froyo and Gingerbread’s Native Apps2sd moves the files to the SD card?
Native apps2sd only moves the apk file of the application leaving other files in internal memory
thus you still have to manage your on-board memory and limit your
choice of apps because it will eat up your memory and later on you
cannot install any files anymore. Additionally, widgets and some
applications are not intended to be move to the SD card. However,
Link2SD is only for root users because it is required that your phone is
rooted.
The idea behind the application is the same. But Link2SD has more relevant features which the Native Apps2sd lacked giving Android
1.5 and up users the chance to have a taste of what it’s like to have a
big phone memory. Additional features were added by the developer to
furher optimize the usage of android devices.
By using Link2SD, you can
move not only the application file, but also the dalvic-cache and
libray files of the application. This means that data will be the only
one left to consume your internal memory thus installing applications
and games would be easier because you can install anything you want
without worrying about the famous low memory problem. Furthermore,
Link2sd covers all files even moving widgets and the unmoveable
applications to the 2nd partition of your SD card.
This is a step by step guide on how you can run Link2SD on your device. This tutorial will work for both stock and cutom ROMs.
For ClockWorkMod Recovery users, you can check the other guide below.
Follow all the instructions carefully to eliminate possible problems.
2. Insert your SD card to a card reader and open it on your computer.
3. Back up all your files to the computer because partitioning will wipe your data.
4. Open Mini Tool in your computer. Locate your SD card (be careful in choosing and make sure not to choose the drive of your computer)
5. Right click and choose Delete.
6. Right click on it again and choose Create New. Create “FAT32″
partition (This is where all your media files will go. Be sure to make
it bigger than the 2nd part)
7. Select “Create as: PRIMARY”
8. Next, create an ext2/ext3/ext4 partition (if you’re on stock ROM,
choose ext2). This is where your apps will go. I suggest a value of
512Mb or 1Gb would be big enough but if you insist you can go as high as
2Gb.9. Select “Create As: PRIMARY” (make sure that it is both set to primary because it will not work if it is not set to primary)
10. Click the “Apply” button on the top left corner and wait for it to finish the process. Done.11. Put back your SD card to your phone and switch it on.12. Download and install Link2sd below13. Open Link2sd. You will be prompted to choose between ext2, ext3, ext4 and FAT32. Select ext2.
14. It will say mount script created. Reboot your phone now.15. Open link2sd and if the message doesn’t show up, you succeeded.16. Go to Link2sd>Settings>check the auto-link (to automatically move apps upon installation)17. If you already have some apps, select “move to phone” then after
moving select “Create Link” (be sure to check the three files: app,
dalvic-cache and library files)
18. To check your memory, select “Storage Info”. This will show you the current state of your internal memory, FAT32, and ext2 partition.
Now you’re done and ready to install vast amount of applications as you wish!
ALTERNATE METHOD(FOR CLOCKWORKMOD RECOVERY USERS ONLY)
NOTE: You can also use the instructions above. This guide will work on both stock and custom ROMs.
- Back up all your files to your computer. Partitioning wipes the files of your SD card.
- Go into recovery mode
- Select “Advanced”
- Select “Partition SD card”
- Choose your SD-ext size (if you’re using a 2Gb SD card, choose 512Mb. If your SD card is 4Gb or greater, you can choose 1024Mb)
- Select 0 swap
- Wait for the process to finish. Reboot.
- Download and install Link2SD below
- Open Link2SD you will be prompted to choose between ext2, ext3, ext4 or FAT32. Choose ext4.
- It will say mount script created. Reboot your phone now.
- Open link2sd and if the message doesn’t show up, you succeded.
- Go to Link2sd>Settings>check the autolink (to automatically move apps upon installation)
- If you already have some apps, select “move to phone” then after moving select “Create Link” (be sure to check the three files: app, dalvic-cache and library files)
- To check your memory, select “Storage Info”. This will show you the current state of your internal memory, FAT32, and ext2 partition.
i'm using link2sd and i accidentally convert these apps (google playstore, gmail, and youtube) as user's apps..is there a possibility to recover these apps??thnx and god bless..
ReplyDeleteit says (no lib files)for some apps is that ok ?
ReplyDeletepls mail me : cowboy_86@ymail.com
ReplyDeleteit says (no lib files)for some apps is that ok ?
it says user privilege problem how to troubleshoot.thanks in advance
ReplyDelete